Safe shopping
Multiple awards and certified!
Our benefits
- Free shipping
- Shipping within 24h
- 30 days money back guarantee
- Purchase comfortable on account
- Buy direct from the manufacturer
Instantaneous water heater fully electronic thermoflow Boiler Elex 3-in1 18/21/24 kW
%
Product number:
147292300
Manufacturer:
Thermoflow
EAN:
4260344976638
Manufacturer product number:
Elex 3-in-1
Product information "Instantaneous water heater fully electronic thermoflow Boiler Elex 3-in1 18/21/24 kW"
- Item Features:
- Model 3in1: The electronically controlled instantaneous water heater with automatic power voltage keeps the outlet temperature constant. This is independent of the inlet temperature up to the output limit. The
- hot water outlet temperature can be adjusted continuously
- Operation: The appliance has a control panel with buttons for switching on or off, as well as arrow buttons for regulating the heat outputLoad profile
- SWarmwater preparation energy efficiency class:
- AWarmwater preparation
- energy
- efficiency in %: 39,6
- When installed, the unit can be connected with a rated output of 18 / 21 / 24 kW.
- Technical data:
- Annual power consumption in kWh: 465
- Daily power consumption in kWh: 1,276
- Rated voltage in V-Hz: 400 3-50
- Rated power in kW: 18/21/24
- Fuse protection in A: 26/30/35
- Min. cable cross section (mm²): 6
- Type of construction: closed
- Temperature setting of the temperature controller (ex works) in C°: 40
- Temperature range (C°): 0-75
- Switch-on quantity (L/min.): 2.5
- max. inlet temperature (C°): 20
- Standstill consumption W/h: 1
- Protection class: I
- Protection class: IP24
- water connection: G 1/2
- max. permissible pressure Mpa: 0,6
- minimum flow pressure MPa: 0,1
- Hot water capacity (∆t=25C°) : 10.0 / 11.8 / 13.0 L/min.
- Dimensions:
- Dimensions HxWxD (mm) / Weight: 472 x 255 x 115 mm / 4.5 kg.
- Packaging dimensions HxWxD (mm) / weight: 500 x 300 x 165 mm / 6 kg
- Important Information & Usage Notice:
- A 400V power connection (three-phase alternating connection) is required for the installation of this device, the assembly (water/ and electrical installation) as well as the initial start-up and maintenance of this device may only be carried out by a qualified electrician in accordance with the applicable regulations as well as in accordance with these instructions! In warranty cases there is an on-site customer service!
- The installation of non-plug-in devices must be carried out by the network operator or by a registered specialist company, which will also assist you in obtaining the network operator's approval for the installation of the device
0 of 0 reviews
Login
No reviews found. Share your insights with others.